Biomineralization induced by chitosan and collagen-based materials with fluoride for dentin coverage: Chemical and morphological analysis.

The prevention and treatment of erosive tooth wear are becoming increasingly important due to its increasing prevalence. The use of natural solutions to modify dental surfaces has become an area of research. Organic materials such as chitosan and hydrolyzed collagen may be a promising option to treat dentin. This in vitro study aimed to evaluate the influence of chitosan or hydrolyzed collagen, alone or combined with acidulated phosphate fluoride (APF) gel, on the composition and morphology of dentin after erosion. Bovine dentin samples were prepared (n = 84) and treated with artificial saliva (AS, negative control); APF gel (F, positive control); chitosan solution (Chi); hydrolyzed collagen solution (Col); fluoride/chitosan composition (F_Chi); and fluoride/hydrolyzed collagen composition (F_Col). Erosive cycles (six cycles of immersion in orange juice for 1 min, followed by immersion in AS for 1 hr) were performed. The materials were characterized by their morphology, composition, and particle size distribution. Micro-energy dispersive X-ray fluorescence spectroscopy and scanning electron were used to evaluate the dentin's inorganic chemical composition and morphology. The F_Col and F groups had a reduction in calcium loss by 17 and 26%, respectively (p < .001). Both of these groups still had a covering layer of agglomerates at the dentin surface after the erosive cycles. The fluoridated chitosan or collagen solutions improved the dentin resistance to erosion as a novel hybrid-fluoride-based material approach to provide surface protection from erosion.

Raman spectroscopy-multivariate analysis related to morphological surface features on nanomaterials applied for dentin coverage.

Raman spectroscopy and scanning electron microscopy (SEM) were used to investigate the effect of coating materials and acidulated phosphate fluoride gel (APF) treatment on dentin before and after erosion-abrasion cycles. A multi-walled carbon nanotube/graphene oxide hybrid carbon-based material (MWCNTO-GO), nanohydroxyapatite (nHAp), or a combined composite (nHAp/MWCNTO-GO) were used as a coating. Seventy root dentin fragments obtained from 40 bovine teeth were prepared and divided into groups (n = 10): negative control, artificial saliva - C, positive control - APF; nHAp; MWCNTO-GO; APF_nHAp; APF_MWCNTO-GO and APF_nHAp/MWCNTO-GO. All samples were subjected to cycles of demineralization (orange juice, pH ~3.7, room temperature, 1 min) followed by remineralization (saliva, 37 °C, 1 h). The remineralization procedures were followed by tooth brushing (150 strokes). The above cycle was repeated 3×/day for 5 days. The previous APF treatment of dentin allowed a better affinity of nHAp and MWCNTO-GO with the inorganic and organic portion of dentin, respectively. This interaction indicates the formation of a protective layer for the dentin surface and for the collagen giving possible protection against erosion. SEM micrographs illustrated the formation of a protective layer after application of the biomaterials and that it was partially or totally removed after the erosion and abrasion. Raman spectroscopy combined with multivariate analysis could distinguish samples with respect to treatment efficacy. The APF_nHAP/MWCNT-GO composite has shown to be a promising material since it has binding characteristics both to the inorganic and organic portion of the dentin and reduced solubility. Mineral-to-matrix ratio (MMR) parameter analysis confirmed the binding capability of MWCNTO-GO-based materials to dentin.

Multi-walled carbon nanotubes/graphene oxide hybrid and nanohydroxyapatite composite: A novel coating to prevent dentin erosion.

To date is emergent the development of novel coatings to protect erosion, especially to preventive dentistry and restorative dentistry. Here, for the first time we report the effectiveness of multi-walled carbon nanotube/graphene oxide hybrid carbon-base material (MWCNTO-GO) combined with nanohydroxyapatite (nHAp) as a protective coating for dentin erosion. Fourier transform Raman spectroscopy (FT-Raman), scanning electron (SEM), and transmission electron (TEM) microscopy were used to investigated the coatings and the effect of acidulated phosphate fluoride gel (APF) treatment on bovine teeth root dentin before and after erosion. The electrochemical corrosion performance of the coating was evaluated. Raman spectra identified that: (i) the phosphate (ν1PO43-) content of dentin was not significantly affected by the treatments and (ii) the carbonate (ν1CO32-) content in dentin increased when nHAp was used. However, the nHAp/MWCNTO-GO composite exposited lower levels of organic matrix (CH bonds) after erosion compared to other treatments. Interesting, SEM micrographs identified that the nHAp/MWCNTO-GO formed layers after erosive cycling when associate with APF treatment, indicating a possible chemical bond among them. Treatments of root dentin with nHAp, MWCNTO-GO, APF_MWCNTO-GO, and APF_nHAp/MWCNTO-GO increased the carbonate content, carbonate/phosphate ratio, and organic matrix band area after erosion. The potentiodynamic polarization curves and Nyquist plot showed that nHAp, MWCNT-GO and nHAp/MWCNT-GO composites acted as protective agents against corrosion process. Clearly, the nHAp/MWCNTO-GO composite was stable after erosive cycling and a thin and acid-resistant film was formed when associated to APF treatment.

The effects of acid erosion and remineralization on enamel and three different dental materials: FT-Raman spectroscopy and scanning electron microscopy analysis.

OBJECTIVES: FT-Raman spectroscopy and scanning electron microscopy (SEM) were employed to test the hypothesis that the beverage consumption or mouthwash utilization would change the chemistry of dental materials and enamel inorganic content. MATERIAL AND METHODS: Bovine enamel samples (n = 36) each received two cavity preparations (n = 72), each pair filled with one of three dental materials (R: nanofilled composite resin, GIC: glass-ionomer cement, RMGIC: resin-modified GIC). Furthermore, they were treated with three different solutions (S: artificial saliva, E: erosion/Pepsi Twist or EM: erosion + mouthwash/Colgate Plax). RESULTS: Reduction of carbonate content of enamel was greater in RE than RS (P < 0.01). Increment of carbonate was greater in GICEM than in GICE and GICS (P < 0.01; P < 0.001). Significant material degradation was found in RE, REM, GICE, and GICEM than in RS and GICS (P < 0.01; P < 0.001). SEM showed clear enamel demineralization after erosion. Material degradation was greater after E and EM than S. GIC and RMGIC materials had a positive effect against acid erosion in the adjacent enamel after remineralization with mouthwash. CONCLUSIONS: The beverage and mouthwash utilization would change R and GIC chemical properties. CLINICAL RELEVANCE: A professional should periodically monitor the glass-ionomer and resin restorations, as they degrade over time under erosive challenges and mouthwash utilization. Microsc. Res. Tech., 2016. © 2016 Wiley Periodicals, Inc. Microsc. Res. Tech. 79:646-656, 2016. © 2016 Wiley Periodicals, Inc.

FT-Raman spectroscopy study of organic matrix degradation in nanofilled resin composite.

This in vitro study evaluated the effect of light curing unit (LCU) type, mouthwashes, and soft drink on chemical degradation of a nanofilled resin composite. Samples (80) were divided into eight groups: halogen LCU, HS--saliva (control); HPT--Pepsi Twist®; HLC--Listerine®; HCP--Colgate Plax®; LED LCU, LS--saliva (control); LPT--Pepsi Twist®; LLC--Listerine®; LCP--Colgate Plax®. The degree of conversion analysis and the measure of the peak area at 2,930 cm-1 (organic matrix) of resin composite were done by Fourier-transform Raman spectroscopy (baseline, after 7 and 14 days). The data were subjected to multifactor analysis of variance (ANOVA) at a 95% confidence followed by Tukey's HSD post-hoc test. The DC ranged from 58.0% (Halogen) to 59.3% (LED) without significance. Differences in the peak area between LCUs were found after 7 days of storage in S and PT. A marked increase in the peak intensity of HLC and LLC groups was found. The soft-start light-activation may influence the chemical degradation of organic matrix in resin composite. Ethanol contained in Listerine® Cool Mint mouthwash had the most significant degradation effect. Raman spectroscopy is shown to be a useful tool to investigate resin composite degradation.

Micro energy-dispersive X-ray fluoresence mapping of enamel and dental materials after chemical erosion.

Energy-dispersive X-ray fluorescence was employed to test the hypothesis that beverage consumption or mouthwash utilization will change the chemical properties of dental materials and enamel mineral content. Bovine enamel samples (n = 45) each received two cavity preparations (n = 90), each pair filled with one of three dental materials (R: nanofilled composite resin; GIC: glass-ionomer cement; RMGIC: resin-modified GIC). Furthermore, they were treated with three different solutions (S: saliva; E: erosion/Pepsi Twist®; or EM: erosion+mouthwash/Colgate Plax®). It was found that mineral loss in enamel was greater in GICE samples than in RE > RMGICE > RMGICEM > REM > GICEM. An increased percentage of Zr was found in REM indicating organic matrix degradation. Dental materials tested (R, GIC, and RMGIC) were not able to protect adjacent enamel from acid erosion by the soft drink tested. The use of mouthwash promoted protection of enamel after erosion by the soft drink. To avoid chemical dissolution by mouthwashes, protection by resin composites with surface sealants is recommended.